The network lamp (NETWORK LAMP)

The network calls to the human being in the place of the wired left office, the warehouse and so on by the lamp and the alarm through the network and the network lamp can know the replying.

• The network lamp has the network interface of the average Ethernet with the network control controller and the personal computer and so on. Because it connects with 10Base-T directly, the personal computer on the side of the terminal is unnecessary.

• It emits a caution by the big warning lamp and the alarm sound in the upper part of the main unit.

• In to push the big push button switch (the black square switch in front of the photograph) which was connected with the network lamp, the caution can be stopped.

• Because to do the remote command published which was connected with the network and the watch personal computer connected can monitor the condition of the network lamp, it finds that the human being in the transmission place replied to the caution.

• The network lamp works as the network server of TCP/IP. In to use a setting program, the IP address of the network lamp can be freely set.

• The network lamp which exceeds 100 in one system in setting an IP address can be installed. (The visitor depends on the limitation on the used network about the number of the maximum connection stands.) and also one network lamp can be used from more than one personal computer, too.

• The lamp which is easy to see mainly adopts the amount brightness LED type which is made by the パトライト Inc. which is a classy specification for the industry. It is an amount lifetime in that there is not anxiety for the bulb exchange, that it is small and the brightness of it.

• Because the lamp of the orange 2 paragraph can be red and be individually controlled in the command, the lighting-up condition can be chosen by the uses such as the independent lighting-up and 交互点滅. (The lamp of the other color is 特注 compatible by the lot ordering).

• A push button switch is detached from the main unit. It places in the high place where it is easy to see a main unit from the perimeter and the free laying-out of a switch to put it on the low place which the hand reaches, and so on, is possible.

• The blink of the lamp and the alarm sound can be chosen by the command.

• It suppressed generation of heat inside the equipment such as the LED lamp drive by the 24-V specification and the amount efficiency switching power as much as possible. Moreover, the AC power could be had at the network lamp without using a cooling fan in using a classy aluminum material for a box.

The operation results

It is used for the call center system of the Nittu pelican convenience style and a lot of network lamps are during activity in each Kanto area Nittu pelican style branch and the delivery place at present.

The operation example

Note

The network lamp is the product to incorporate into the system and to sell it. The control command itself of the network lamp is very simple but because it is the equipment which connects with the network, in case of development, he needs knowledge with the degree which has faced a network. (There is a program of the sample of VB of controlling from VB, and so on..)
Because it is producing in the receipt by the lot unit in the present on the nature of the goods, the sale with the present place single kind of article doesn't go.
Being under, it is repairing a product with Send-Back to the trouble in the support in program development and at the time after shipment.

The product development : Techno Veins


Last Update :2011/09/09